| Model | RG-AP130(W2) |
| Basic Specifications |
| Radio | Concurrent dual-band dual-radio |
| Protocol | 802.11a/b/g/n, 802.11ac Wave 1, 802.11ac Wave 2 |
| Operating Bands | 2.4GHz and 5GHz |
| Antenna | Built-in omnidirectional antenna
2x2 MU-MIMO |
| Spatial Streams | 2 |
| Modulation | 11b: DSS:CCK@5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps
11a/g: OFDM:64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps
11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM
11ac: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM |
| IP Rating | IP41 |
| Ports |
| Service Port | Front: 4 10/100/1000M Ethernet ports
Side: 1 RJ-45 port(RJ-11 combo)
Rear: 1 10/100/1000M uplink port
1 RJ-45 pass-through port (RJ-11 combo) |
| Management Port | 1 console port (Micro USB) |
| Power |
| Power Supply | PoE (802.3af), local DC power supply |
| Power Consumption | <8W |
| WLAN |
| Maximum clients per AP | Up to 32 |
| BSSID capacity | Up to 8 per radio
Up to 16 per AP |
| SSID hiding | Support |
| Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID | Support |
| Remote Intelligent Perception Technology (RIPT) | Support |
| Intelligentload balancing based on the number of users or traffic | Support |
| STA control | SSID/radio-based |
| Bandwidth control | STA/SSID/AP-based speed control |
| Security |
| PSK, Web, and 802.1x authentication | Support |
| Data encryption | WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
| QR code authentication | Support |
| SMS authentication | Support |
| PEAP authentication | Support |
| Data frame filtering | Whitelist, static/dynamic blacklist |
| User isolation | Support |
| Rogue AP detection and countermeasure | Support |
| Dynamic ACL assignment | Support |
| RADIUS | Support |
| CPU Protection Policy (CPP) | Support |
| Network Foundation Protection Policy (NFPP) | Support |
| Wireless Intrusion Detection System(WIDS) | Support |
| Remote probe | Future release support |
| Routing |
| IPv4 address | Static IP address or DHCP reservation |
| Multicast | Multicast to unicast conversion |
| Location-based Service |
| Wireless position tracking | Support |
| Management and Maintenance |
| Network management | SNMP v1/v2C/v3, Telnet, TFTP, FTP and web management |
| Visualized wireless heat map analysis | |
| Real-time spectrum analysis | |
| Fault detection and alarm | Support |
| Statistics and logs | Support |
| FAT/FIT switching | The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. |
| Specifications |
| Dimensions (W x D x H) (mm) | 116 × 86 × 42 |
| Weight | 0.23kg |
| Work Environment |
| Temperature | Operating Temperature: -10°C to 45°C
Storage Temperature: -40°C to 70°C |
| Humidity | Operating Humidity: 10% to 95% (non-condensing)
Storage Humidity: 5% to 95% (non-condensing) |
| Installation Mode | Standard 86-type faceplate installation |