| Model | RG-AP180 |
| Basic Specifications |
| Radio | Dual-radio dual-band |
| Protocol | Support concurrent 802.11a/n/ac/ax and 802.11b/g/n/ax |
| Spatial Streams | 4 spatial streams, 2x2 MIMO |
| Modulation | 11b：DSS:CCK@5.5/11Mbps,DQPSK@2Mbps,DBPSK@1Mbps
11a/g：OFDM:64QAM@48/54Mbps,16QAM@24Mbps,QPSK@12/18Mbps,BPSK@6/9Mbps
11n：MIMO-OFDM:BPSK,QPSK,16QAM,64QAM
11ac：MIMO-OFDM:BPSK,QPSK,16QAM,64QAM,256QAM
11ax: MIMO-OFDM:BPSK,QPSK,16QAM,64QAM,256QAM,1024QAM |
| IP Rating | IP41 |
| 11ax Feature | Support 802.11ax
Support MU-MIMO |
| Ports |
| Service Port | Front：4 10/100/1000Mbps Ethernet ports
Rear：1 10/100/1000Mbps uplink port |
| Management Port | 1 Micro USB port (hidden) |
| Power |
| Power Supply | Support PoE
Support local power supply (DC) |
| Transmit Power | ≤100mw（20dBm, radio transmit power only） |
| Power Consumption | ＜10W |
| WLAN |
| Maximum clients per AP | 1024 |
| BSSID capacity | 8（recommended to configure a maximum of 5 BSSIDs per radio in actual application） |
| SSID hiding | Support |
| Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID | Support |
| Remote Intelligent Perception Technology (RIPT) | Support |
| Intelligentload balancing based on the number of users or traffic | Support |
| STA control | SSID/radio-based |
| Bandwidth control | STA/SSID/AP-based speed control |
| Security |
| PSK, Web, and 802.1x authentication | Support |
| Data encryption | WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
| QR code authentication | Support (integration with RG-WS series wireless controller) |
| SMS authentication | Support (integration with RG-WS series wireless controller) |
| PEAP authentication | Support (integration with RG-WS series wireless controller) |
| Data frame filtering | Whitelist, static/dynamic blacklist |
| User isolation | Support |
| Rogue AP detection and countermeasure | Support |
| Dynamic ACL assignment | Support |
| RADIUS | Support |
| CPU Protection Policy (CPP) | Support |
| Network Foundation Protection Policy (NFPP) | Support |
| Wireless Intrusion Detection System(WIDS) | Support |
| Routing |
| IPv4 address | Static IP address or DHCP |
| IPv6 | Support |
| Multicast – IGMP Snooping | Support |
| Management and Maintenance |
| Supported wireless LAN controllers | Ruijie WS Series Wireless Controller
Ruijie MACC-Base Software Controller
Ruijie Cloud (Public Cloud) |
| Management protocol | Telnet, SSH, TFTP, Web |
| Wireless Intelligent AI Optimization Service (WIS) | Support |
| SNMP | SNMPV1,V2c,V3 |
| Fault detection and alarm | Support |
| Syslog / Debug | Support |
| FAT/FIT/MACC mode switching | Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management |
| Specifications |
| Dimensions (W x D x H) (mm) | 116mm * 86mm *40mm |
| Weight | 0.37kg |
| Work Environment |
| Temperature | Operating temperature：0°C～45°C
Storage Temperature: -40°C to 70°C |
| Humidity | Operating humidity：5％～95％（non-condensing）
Storage humidity：5％～95％（non-condensing） |
| Installation Mode | Compatible with UK/US/EU
Junction box
*Universal Mount Kit need to purchase separately for US/EU junction box |