| Model | RG-AP630(IDA2) |
| Target Deployments | For big campus, wireless city, harbour, storage room, mine |
| Basic Specifications |
| Radio | Concurrent dual-radio dual-band |
| Protocol | 802.11a/b/g/n/ac |
| Operating Bands | 802.11b/g/n: 2.4GHz to 2.483GHz |
| 802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz
(vary depending on countries) |
| Spatial Streams | 4 |
| Adjustable Power | 1dBm |
| IP Rating | IP67 |
| Ports |
| Service Port | One 10/100/1000Base-T Port（ETH1/PoE IN)；One 10/100/1000Base-T Port(ETH2)；
One 1000M SFP Port(Combo Port) |
| Management Port | 1 Console Port(RJ45) |
| Power |
| Power Supply | PoE+ (802.3at) |
| Power Consumption | <25W |
| WLAN |
| Maximum clients per AP | Up to 512 |
| SSID capacity | Up to 16 per radio
Up to 32 per AP |
| SSID hiding | Support |
| Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID | Support |
| Remote Intelligent Perception Technology (RIPT) | Support |
| X-speed | Support |
| Intelligentload balancing based on the number of users or traffic | Support |
| STA control | SSID/radio-based |
| Bandwidth control | STA/SSID/AP-based speed control |
| Preference for 5GHz (band select) | Support |
| Wireless position tracking | Support |
| Dynamic Frequency Selection(DFS) | Future Release Support |
| Security |
| PSK, Web, 802.1x authentication | Support |
| Data encryption | WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
| Data encryption | Support |
| SMS authentication | Support |
| PEAP authentication | Support |
| Data frame filtering | Whitelist, static/dynamic blacklist |
| User isolation | Support |
| Rogue AP detection and countermeasure | Support |
| Dynamic ACL assignment | Support |
| WAPI | Support |
| RADIUS | Support |
| CPU Protection Policy (CPP) | Support |
| Network Foundation Protection Policy (NFPP) | Support |
| Wireless Intrusion Detection System(WIDS) | Support |
| Wireless Intrusion Prevention System (WIPS) | Support |
| Routing |
| IPv4 address | Static IP address or DHCP reservation |
| IPv6 CAPWAP tunnel | Support |
| ICMPv6 | Support |
| IPv6 address | Manual or automatic configuration |
| Multicast | Multicast to unicast conversion |
| Management and Maintenance |
| Network management | SNMP v1/v2C/v3, Telnet, SSH, TFTP, and FTP and web management |
| Cloud AC management | Support |
| FAT/FIT switching | The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. |
| External Characteristics |
| Lock | Support |
| LED Indicators | Power status and WDS signal strength |
| Relevant Standard |
| Wi-Fi Alliance Certification | Support |
| Radio Standard | EN300 328; EN301 893 |
| EMC Standard | GB9254; EN301 489-1; EN301 489-17 |
| Safety Standard | GB4943; EN/IEC 60950-1 |
| Specifications |
| Dimensions (W x D x H) (mm) | 276 × 246 × 90 |
| Weight | <2.5kg |
| Work Environment |
| Temperature | Operating Temperature: -40°C to 65°C |
| Storage Temperature: -40°C to 85°C |
| Humidity | Operating Humidity: 0% to 100% (non-condensing) |
| Storage Humidity: 0% to 100% (non-condensing) |
| Installation Mode | Wall/pole-mount installation |