| Model | RG-AP720-I |
| Target Deployments | For campuses, offices, hospitals, and hotspots of service providers |
| Type | Indoor Ceiling/Wall-mounting |
| Basic Specifications |
| Radio | Concurrent dual-radio dual-band |
| Protocol | 802.11a/b/g/n/ac
Wave2 |
| Operating Bands | 802.11b/g/n: 2.4GHz to 2.483GHz
802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz (vary depending on countries) |
| Antenna | Built-in Smart Antenna
2×2 MU-MIMO |
| Max Throughput | 400Mbps@2.4GHz
867Mbps@5GHz
1267Mbps per AP |
| Spatial Streams | 2 |
| Modulation | OFDM: BPSK@6/9Mbps; QPSK@12/18Mbps; 16-QAM@24Mbps; 64-QAM@48/54Mbps; DSSS:; DBPSK@1Mbps; DQPSK@2Mbps; CCK@5.5/11Mbps; MIMO-OFDM:; BPSK, QPSK, 16QAM, 64QAM and 256QAM; |
| Receiver Sensitivity | 11b：-91dBm(1Mbps)，-88dBm(5Mbps)，-85dBm(11Mbps);
11a/g：-89dBm（6Mbps），-80dBm（24Mbps），-76dBm（36Mbps），-71dBm（54Mbp);
11n：-83dBm@MCS0，-65dBm@MCS7，-83dBm@MCS8，-65dBm@MCS15;
11ac HT20：-83dBm（MCS0）, -57dBm（MCS9);
11ac HT40：-79dBm（MCS0）, -57dBm（MCS9）;
11ac HT80：-76dBm（MCS0）, -51dBm（MCS9） |
| Maximum Transmit Power | 100mW |
| Adjustable Power | 1dBm |
| IP Rating | IP41 |
| Ports |
| Service Port | 2 10/100/1000BASE-T Ethernet ports (LAN1 port supports PoE & Uplink) 1 USB port |
| Management Port | 1 console port |
| Power |
| Power Supply | Local power supply (DC 48V) and PoE+ (802.3af/at)
(Power adapters sold separately) |
| Power Consumption | <12.95W |
| WLAN |
| Maximum clients per AP | 256 |
| BSSID capacity | Up to 16 per radioUp to 32 per AP |
| SSID hiding | Support |
| Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID | Support |
| Remote Intelligent Perception Technology (RIPT) | Support |
| X-speed | Support |
| Intelligentload balancing based on the number of users or traffic | Support |
| STA control | SSID/radio-based |
| Bandwidth control | STA/SSID/AP-based speed control |
| Preference for 5GHz (band select) | Support |
| Wireless position tracking | Support |
| Dynamic Frequency Selection(DFS) | Future Release Support |
| Security |
| PSK, Web, 802.1x authentication | Support |
| PPSK authentication | Support |
| Data encryption | WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
| SMS authentication | Support |
| PEAP authentication | Support |
| Data frame filtering | Whitelist, static/dynamic blacklist |
| User isolation | Support |
| Rogue AP detection and countermeasure | Support |
| Dynamic ACL assignment | Support |
| RADIUS | Support |
| Wireless Intrusion Detection System(WIDS) | Support |
| Wireless Intrusion Prevention System (WIPS) | Support |
| Bluetooth |
| iBeacon | Support |
| Routing |
| IPv4 address | Static IP address or DHCP reservation |
| IPv6 CAPWAP tunnel | Support |
| ICMPv6 | Support |
| IPv6 address | Manual or automatic configuration |
| Multicast | Multicast to unicast conversion |
| Management and Maintenance |
| Network management | SNMP v1/v2C/v3, Telnet, TFTP, Web management |
| Cloud AC management | Support |
| FAT/FIT switching | The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. |
| External Characteristics |
| Lock | Support |
| LED Indicators | 1 LED (red, green, blue, orange, and flashing modes, breathing flashing mode for smart device access, and the indicator can be switched off to silent mode) |
| Relevant Standard |
| Wi-Fi Alliance Certification | Support |
| Radio Standard | EN300 328; EN301 893 |
| EMC Standard | GB9254, EN301 489 |
| Safety Standard | GB4943, EN/IEC 60950-1 |
| Specifications |
| Dimensions (W x D x H) (mm) | 180 × 180 × 20 |
| Weight | 0.37kg |
| Work Environment |
| Temperature | Operating Temperature: -10°C to 45°C
Storage Temperature: -40°C to 70°C |
| Humidity | Operating Humidity: 5% to 95% (non-condensing)
Storage Humidity: 5% to 95% (non-condensing) |
| Installation Mode | Ceiling/wall-mountable |