RG-AP720-I Wireless Access Point

Model

RG-AP720-I

Target Deployments

For campuses, offices, hospitals, and hotspots of service providers

Type

Indoor Ceiling/Wall-mounting

Basic Specifications

Radio

Concurrent dual-radio dual-band

Protocol

802.11a/b/g/n/ac
Wave2

Operating Bands

802.11b/g/n: 2.4GHz to 2.483GHz
802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz (vary depending on countries)

Antenna

Built-in Smart Antenna
2×2 MU-MIMO

Max Throughput

400Mbps@2.4GHz
867Mbps@5GHz
1267Mbps per AP

Spatial Streams

2

Modulation

OFDM: BPSK@6/9Mbps; QPSK@12/18Mbps; 16-QAM@24Mbps; 64-QAM@48/54Mbps; DSSS:; DBPSK@1Mbps; DQPSK@2Mbps; CCK@5.5/11Mbps; MIMO-OFDM:; BPSK, QPSK, 16QAM, 64QAM and 256QAM;

Receiver Sensitivity

11b：-91dBm(1Mbps)，-88dBm(5Mbps)，-85dBm(11Mbps);
11a/g：-89dBm（6Mbps），-80dBm（24Mbps），-76dBm（36Mbps），-71dBm（54Mbp);
11n：-83dBm@MCS0，-65dBm@MCS7，-83dBm@MCS8，-65dBm@MCS15;
11ac HT20：-83dBm（MCS0）, -57dBm（MCS9);
11ac HT40：-79dBm（MCS0）, -57dBm（MCS9）;
11ac HT80：-76dBm（MCS0）, -51dBm（MCS9）

Maximum Transmit Power

100mW

Adjustable Power

1dBm

IP Rating

IP41

Ports

Service Port

2 10/100/1000BASE-T Ethernet ports (LAN1 port supports PoE & Uplink) 1 USB port

Management Port

1 console port

Power

Power Supply

Local power supply (DC 48V) and PoE+ (802.3af/at)
(Power adapters sold separately)

Power Consumption

<12.95W

WLAN

Maximum clients per AP

256

BSSID capacity

Up to 16 per radioUp to 32 per AP

SSID hiding

Support

Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID

Support

Remote Intelligent Perception Technology (RIPT)

Support

X-speed

Support

Intelligentload balancing based on the number of users or traffic

Support

STA control

SSID/radio-based

Bandwidth control

STA/SSID/AP-based speed control

Preference for 5GHz (band select)

Support

Wireless position tracking

Support

Dynamic Frequency Selection(DFS)

Future Release Support

Security

PSK, Web, 802.1x authentication

Support

PPSK authentication

Support

Data encryption

WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits)

SMS authentication

Support

PEAP authentication

Support

Data frame filtering

Whitelist, static/dynamic blacklist

User isolation

Support

Rogue AP detection and countermeasure

Support

Dynamic ACL assignment

Support

RADIUS

Support

Wireless Intrusion Detection System(WIDS)

Support

Wireless Intrusion Prevention System (WIPS)

Support

Bluetooth

iBeacon

Support

Routing

IPv4 address

Static IP address or DHCP reservation

IPv6 CAPWAP tunnel

Support

ICMPv6

Support

IPv6 address

Manual or automatic configuration

Multicast

Multicast to unicast conversion

Management and Maintenance

Network management

SNMP v1/v2C/v3, Telnet, TFTP, Web management

Cloud AC management

Support

FAT/FIT switching

The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.

External Characteristics

Lock

Support

LED Indicators

1 LED (red, green, blue, orange, and flashing modes, breathing flashing mode for smart device access, and the indicator can be switched off to silent mode)

Relevant Standard

Wi-Fi Alliance Certification

Support

Radio Standard

EN300 328; EN301 893

EMC Standard

GB9254, EN301 489

Safety Standard

GB4943, EN/IEC 60950-1

Specifications

Dimensions (W x D x H) (mm)

180 × 180 × 20

Weight

0.37kg

Work Environment

Temperature

Operating Temperature: -10°C to 45°C
Storage Temperature: -40°C to 70°C

Humidity

Operating Humidity: 5% to 95% (non-condensing)
Storage Humidity: 5% to 95% (non-condensing)

Installation Mode

Ceiling/wall-mountable