Paradox

• Controls and monitors a control panel through an IP network (LAN / WAN / Internet)
  
• Reports control panel events via IP to the Paradox IPR512 GPRS / IP Monitoring Receiver and / or IPRS-7 GPRS / IP PC Receiver Software
  
• Two I/Os on board; controlled via the web interface, triggering an email
  
• Sends notification and alarm system events via email
  
• Arm / Disarm individual partitions via Insite GOLD app
  
• Connects to Swan for easy installation (no port forwarding)
  
• Enables Insite GOLD, or BabyWare to access your system through the Internet
  
• Push notification to Insite GOLD app
  
• HTTPS support for improving security (HyperText Transfer Protocol Secure; a widely used communications protocol for secure communication over a computer network)
  
• Very low bandwidth consumption

• Record a "Site ID" to identify the installation site (Requires an EVO system V2.10 or higher to program, and InField software)
  
• Dial up to 8 telephone numbers to report a burglar, panic or fire alarm using prerecorded messages
  
• Voice-guided menu
  
• Arm / Disarm the system remotely via telephone
  
• Control PGMs and toggle utility keys remotely via telephone using DTMF
  
• Connects directly onto the control panel
  
• In-Field firmware upgradeable via 307USB using an EVO Series panel
  
• Compatible with EVO Series, Spectra SP Series (V2.10 or higher), MG6250, MG5000, MG5050 (V2.10 or higher), MG5075 and PCS250 GPRS / GSM Module

• Compatible with SP Series control panels (V4.54 and higher)
  
• 32 wireless zones (SP Series only)
  
• Maximum number of remote controls: 32
  
• Remote control compatibility: REM1, RAC1
  
• Transmitter compatibility: DCT10, DCTXP2, DCT2, PMD1P, PMD75, PMD85, SD738 (SP only)
  
• In-field firmware upgradable via In-Field Firmware Upgrade software
  
• RF jamming supervision
  
• Low battery, tamper, and check-in supervision
  
• Transmitter signal strength display
  
• 2 PGM outputs follow buttons 1 and 2 on REM1/RAC1 (also programmable through the panel)

• 32 wireless addressable zones
  
• Maximum number of remote controls: 999 with EVO Series, 32 with Spectra SP Series
  
• Supports wireless PGMs (8 with EVO Series, 16 with Spectra SP Series only)
  
• Supports SR130 and SR150 Wireless Sirens
  
• Supports all Magellan transmitters including 2WPGM
  
• Supports 2 RPT1 and 8 K37 (Spectra SP Series only)
  
• Remote control compatibility:
  - RAC1, REM15, REM1, REM101, REM2, REM3 and REM25
  
• 3 PGM outputs and 1 optional output
  - PGM outputs: PGM1 and PGM2 - 150 mA PGM transistor outputs
  - PGM3 - Form C relay output rated at 5A / 28 Vdc, N.O. / N.C. (PGM4 optional)

• 7" vivid color display
  
• Built-in zone input
  
• Customizable labels (zones, partitions, users, doors, and PGMs)
  
• External SD Media Card slot (4 GB with 2 GB of free space) for uploading photos; acts like a digital picture frame
  
• Firmware upgradable via SD card
  
• Indoor temperature reading
  
• In-wall bracket (optional)
  
• Compatible with Swan, EVO, Spectra and Magellan
  

• Built-in transceiver (433 or 868 MHz)
  
• 32-character, blue LCD with programmable labels
  
• StayD with status LED
  
• Real-time zone alarm display
  
• In-field firmware upgradable via 307USB and WinLoad
  
• 1 keypad zone input
  
• 1 PGM output (follows arm status)
  
• 8 one-touch action buttons
  
• 3 keypad-activated panic alarms
  
• Adjustable backlight, contrast, and scroll speed
  
• Independently set chime zones

• Beautiful new design
  
• 32-character blue LCD with programmable labels
  
• Real-time zone alarm display (until disarmed)
  
• In-field firmware upgrade via 307USB
  
• StayD status LED
  
• Menu-driven programming for easy system setup (installer and end user)
  
• 1 keypad zone input
  
• Independently set chime zones
  
• 8 one-touch action buttons
  
• 3 keypad-activated panic alarms
  
• Adjustable backlight, contrast and scroll speed

• Beautiful new design
  
• Supports StayD Mode
  
• 32-zone LED display
  
• Separate Arm, Sleep, Stay and Off LEDs per partition
  
• In-field firmware upgrade via 307USB and WinLoad
  
• 1 keypad zone input
  
• Independently set chime zones
  
• 7 one-touch action buttons
  
• 3 keypad-activated panic alarms
  
• Adjustable backlight
  
• Connects to 4-wire communication bus

• Powered by 2 "AA" batteries, with built-in backup battery (PA6 is optional)
  
• A 6Vdc power adaptor (PA6 not included) is not required but can be used as an alternative power source
  
• Provides real-time zone and system status, and can be used to program the panel using only battery power (2 "AA" alkaline batteries)
  
• Fixed message display that guides you in the operation of the system
  
• Displays the status of 32 zones in 2 partitions
  
• Displays Arm, Sleep, Stay and Disarmed status for each partition
  
• Displays StayD, troubles, bypassed zones and alarm memory
  
• In-field firmware upgrade via 307USB
  
• Adjustable backlight
  

• Fixed message display that guides you in the operation of the system
  
• Displays the status of 32 zones in 2 partitions
  
• StayD status icon
  
• Displays Arm, Sleep, Stay and Disarmed status for each partition
  
• Displays troubles, bypassed zones and alarm memory
  
• Adjustable backlight
  
• In-field firmware upgrade via 307USB
  
• 1 keypad zone input
  
• Independently set chime zones
  
• 8 one-touch action buttons
  
• 3 keypad-activated panic alarms
  
• Connects to 4-wire expansion bus
  
• Compatible with MG5000, MG5050, MG5075 and Spectra SP series V2.31 and up

• Supports StayD Mode
  
• 10-zone LED display
  
• Separate Arm, Sleep, Stay and Off LEDs per partition
  
• Patented Key Light display (button lights up to indicate an open zone)
  
• 1 keypad zone input
  
• Independently set chime zones
  
• 7 one-touch action buttons
  
• 3 keypad-activated panic alarms
  
• Adjustable backlight
  
• Connects to 4-wire communication bus
  
• Compatible with MG5000, MG5050, MG5075, and Spectra SP series

• Supports StayD Mode
  
• 10-zone LED display
  
• Separate Arm, Sleep, Stay and Off LEDs per partition
  
• Patented Key Light display (button lights up to indicate an open zone)
  
• 1 keypad zone input
  
• Independently set chime zones
  
• 7 one-touch action buttons
  
• 3 keypad-activated panic alarms
  
• Adjustable backlight
  
• Connects to 4-wire communication bus
  
• Compatible with MG5000, MG5050, MG5075, and Spectra SP series

• Single partition keypad
  
• 10-zone LED display
  
• StayD status LED
  
• Patented Key Light display (button lights up to indicate an open zone)
  
• Arm, Sleep, Stay and Off keys illuminate to indicate partition status
  
• Adjustable backlight
  
• Compatible with MG5000, MG5050, MG5075 and Spectra SP series

• Supports StayD mode
• 4-wire expansion bus
• Wireless expansion (via RTX3 / RX1)
• Expandable to 32 zones
• Expandable to 16 PGMs
• 2 partitions
• 32 user codes
• Supports PCS series modules
• Supports IP150 Internet Module

• Supports StayD mode
• 4-wire expansion bus
• Wireless expansion (via RTX3 / RX1)
• Expandable to 32 zones
• Expandable to 16 PGMs
• 2 partitions
• 32 user codes
• Supports PCS series modules
• Supports IP150 Internet Module
• Supports VDMP3 Plug-in Voice Module